MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
Schedule Backup
Click 
to enter the setup page for schedule backup. Depending on your needs, after you set all the schedules, you can only enable the ones you currently need and disable the rest, which might be used later.
1.Enable
Check this to enable a schedule for a backup. You still need to click
after you check to enable a schedule.
2.Schedule Backup
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
You can set the schedule backup by date or by weekday by selecting By Date or By Weekday.
By Date:
If you set the schedule backup by date, you can key in the date
directly or choose from the 
to
add it to the 
column. You can set multiple dates
(max 60 days) for a backup schedule. To take off a date from the column, click on the date you wish to delete and press [Delete] or [Backspace] on the keyboard.
By Weekday:
If you set the schedule backup by weekday, directly choose any day in a week. Multiple days for a backup schedule are also acceptable.
3.Location
You need to specify a destination here to move the backup files if you check Move To. If you check Delete all. Don’t make copies., the system will delete all the files and leave no copies.
4.Start Time
Set the start time of the backup schedule.
5.Files between the time
Start & End:
The system will look for files of the selected cameras between the Start and End time you set here. Adjust the time by hour/minute and AM/PM with the up/down button. Note that the start time cannot be later than the ending time. That means you can’t span the time to the next day. To backup files that cover more than 1 day, you need to separate the files into 2 or more backup schedules.
Days before scheduled dates:
You can also backup files X days
If you schedule for 2003/03/03 and 2003/03/06, and you enter “2” in the number of days before scheduled dates field, then the
69 | 70 |
