Pelco Shutting Down the DVR5100, To re-enter your login information, To shut down the DVR5100

To re-enter your login information:

TIP: You can use an optional KBD5000 keyboard or a USB PC keyboard and mouse to perform some setup tasks more easily. Refer to Understanding DVR Controls and Menus on page 13 for a comparison on using any of these devices to work with the on-screen menus.

1.Verify that the user name is correct, and then select a different user name if necessary.

2.To re-enter the password, do the following:

a.On the Control Pad, press . The on-screen keyboard appears. (Figure 2)

b.Use the joystick to navigate to the first number your password, and then press Enter/Shift on the Control Pad.

c.Repeat these steps until you have entered the entire password.

d. Press to accept the password, or press to cancel the password and return to the Login dialog box.

3.From the Login dialog box, press to accept the user name and password. If the password is correct, the DVR5100 displays the main application window.

4.If re-entering your user name and password fails to start the application, contact your system administrator to verify that the user name and password are still valid.

SHUTTING DOWN THE DVR5100

WARNING: Do not shut down the DVR5100 by turning off the power. Doing so can cause data loss or can corrupt the database. Always follow the procedures in this section to turn off the unit.

To shut down the DVR5100:

TIP: You can use an optional KBD5000 keyboard or a USB PC keyboard and mouse to perform some setup tasks more easily. Refer to Understanding DVR Controls and Menus on page 13 for a comparison on using any of these devices to work with the on-screen menus.

1. Press the Menu button to display the main menu.

Figure 4. Selecting Logout From the Main Menu

C1696M (8/06) 11