Using Patterns, Presets, and Scans
With the DVR5100 you can activate patterns, presets, and scans. A pattern is a
Patterns, presets and scans can be activated automatically or manually from the DVR5100. Patterns and presets must be
This section describes how to operate the DVR5100 to run patterns, presets, and scans and is organized into the following topics:
•Activating PTZ Patterns, below
•Stopping a Pattern on page 42
•Activating Presets on page 42
•Activating Scans on page 43
ACTIVATING PTZ PATTERNS
A pattern is a
NOTE: The instructions in this manual refer to the DVR5100 Control Pad. Refer to Navigating Through Menus with the KBD5000 Keyboard on page 4 and Navigating Through Menus with a PC Keyboard and Mouse on page 6 for alternate keystrokes if you are using either of these devices.
To activate a pattern:
1. From the main menu, select Actions. The Actions menu appears.
Figure 47. Actions Menu
2. Navigate to PTZ Operations, and then press Enter/Shift . The PTZ Operations dialog box appears.
Figure 48. PTZ Operations Dialog Box
3.On the Panel Keypad press or until the pattern number appears in the text field.
4.Press the blue function key . The pattern starts. To exit the dialog box without activating the pattern, press the red function key .
C1696M (8/06) | 41 |