PaperJet 50 User Guide 26/7/01 10:20 am Page 33 user guide – Edition 3 – 29.8.00
To switch ECM mode on/off
Polling
Function
F
Start
Function
F
Start
Volume
Start
Stop
ECM (Error Correction Mode) is a system for correcting errors caused by interference on the line. When switched on, the display shows E when sending or receiving to/from another machine using ECM. The default setting for your machine is to have ECM switched ON and you should not have to change it. However, you can switch it off if you wish.
Press until the display shows FAX
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Press until the display shows ECM: ON
Press to switch between ON and OFF.
Press to confirm the option displayed.
To return to standby.
Polling lets you call another fax machine to retrieve a document automatically.
It also enables another fax machine to call your PaperJet 50 and request a document that you have set ready to be received.
This is often also known as ‘faxback’.
To poll a document from another fax machine
When you know that another fax machine has a document ready for polling, you can set your PaperJet 50 to receive the document.
Function
FPress until the display shows POLLING RX
Press until the display shows TYPE TIME
Start
|
| Either | |
Enter the time you want to start calling the | |||
other fax machine then press Start. | |||
|
| ||
|
| Or | |
|
| Press the Start button to begin polling | |
|
| ||
Start | immediately. Display shows TYPE FAX | ||
|
| NUMBER | |
Dial the number of the fax machine from | |||
which you want to poll a document. | |||
|
| ||
|
| Press to confirm. Display shows POLL RX | |
|
| ||
Start | and the time at which you have set it to poll. | ||
|
| You can still send and receive other faxes as | |
|
| normal. |
33