PaperJet 50 User Guide 26/7/01 10:19 am Page 20 user guide – Edition 3 – 29.8.00
CANCEL – the machine cancels the memory setting and returns to standby.
CHANGE PARAM? – you can change the fax number and time settings. Display shows TYPE TIME.
Change the time if required.
Receiving faxes
RX Mode | By pressing the RX MODE button you can | |
|
| set your PaperJet 50 to receive a document |
|
| |
|
| |
|
| in four different ways: |
Start
Start
Start
Display shows TYPE NUMBER and the number already entered.
You can change the number if required.
Repeat the 2 steps above for all the numbers that have been entered.
Display shows TYPE FAX NUMBER.
Enter a new number if required.
Repeat the last step until you have entered all the numbers you want up to a maximum of 10.
After entering your last number press Start again to confirm. Display shows AUTOMATIC RX (or current receive mode) and MEMORY TX.
Start
Press to display the following settings.
AUTOMATIC RX – This is Automatic reception. Your fax machine automatically answers fax calls (this is the default setting).
TAD FAX – This is the receive mode to use if you want to use your machine in conjunction with a telephone answering machine to enable you to take fax and voice messages.
MANUAL RX – This is Manual reception.
You answer calls in person and receive faxes by pressing the Start button if you hear the fax tones.
PHONE/FAX RX – This is Automatic reception with call recognition. After the set number of rings (default 2), your fax machine will answer the call. If it is a fax, it is received.
If it is a voice call the machine beeps for up to 20 seconds and the display shows LIFT HANDSET. If you do not lift the handset the machine prepares to receive a fax.
If you pick up the phone before your machine takes the call and you hear fax tones, press the Start button to begin reception and hang up the handset.
20
