PaperJet 50 User Guide 26/7/01 10:19 am Page 24 user guide – Edition 3 – 29.8.00
Reports and lists
Your PaperJet 50 prints the following reports
Power failure report
Always printed automatically.
–if a power failure occurs while a fax is being sent or received the report gives you details about that fax.
–if a power failure occurs before sending when a document has been stored in the memory, or after a fax has been received into memory and not printed out, the report details the number of pages lost from the memory and the date and time of power failure.
Activity report
Provides details of the last 32 faxes sent and received. The report is printed automatically and you can request an activity report at any time.
Transmission report
Provides confirmation of the results of the last fax sent. You can set your PaperJet 50 to print a last transmission report after every fax, every failed fax, or upon request. The default is every failed fax.
Broadcasting report
Contains details about the last broadcast fax sent (see page 25). It is printed automatically after each broadcast fax. You can switch this setting off. The default is ON.
Delayed transmission report
This is a report that is printed automatically when you set a delayed transmission. It gives the number dialled and the time of the transmission. The default is OFF.
What the report terms mean
Reports contain the following information:
Act. n. | Each fax sent and received is given |
| a number. |
|
|
Type | The type of operation: |
| TX, TX ECM, TX POLL, TX POLL ECM |
| for faxes sent. |
| RX, RX ECM, RX POLL, RX POLL ECM |
| for faxes received. |
|
|
Doc. N. | Reference number of document |
| stored in the memory for sending. |
|
|
Dialled Number Fax number dialled.
Received Id | Number (and name if available) of the |
| person called providing it has been |
| stored on their fax machine. |
|
|
Date/Time | Date and time fax was sent or received. |
|
|
Duration | Length of call in minutes and seconds. |
|
|
Pages | Total number of pages sent or received. |
|
|
Result | OK if fax was sent or received |
| successfully. |
| XX ERROR CODE if the fax did not go |
| through properly. See page 41 for the |
| meaning of the error codes. |
24
