To broadcast a document, To fax from memory, Number | BT 50 instruction

PaperJet 50 User Guide 26/7/01 10:18 am Page 19 user guide – Edition 3 – 29.8.00

To broadcast a document

You can set your machine to send a document to up 10 different numbers (broadcasting).

See “To fax from memory” below.

To fax from memory

Your PaperJet 50 has a memory which lets you store one document for sending at a pre-set time.

Place document face down in the document feeder.

If necessary set the Contrast and Resolution settings.

Function

FDisplay shows TX FROM MEMORY

	The document is scanned into the memory.
Start	Display shows STORING then TYPE TIME

HH:MM

If using the 12 hour clock, press the Function button to switch between a for AM and p for PM.

Press the < > buttons to move the cursor.

		Display shows TYPE	FAX NUMBER. If

Start		required, enter the second number to which
		you want to send your fax and press the
		Start button again.
		Display shows TYPE	NUMBER and the

Start

number already entered.

0-9You can change the number if required.

Repeat the last step until you have entered all the numbers you want up to a maximum of 10.

After entering your last number press Start

Start again to confirm. Display shows TX SET then AUTOMATIC RX (or current receive mode) and MEMORY TX.

To change, re-send or cancel a stored document

When you have stored a document in the memory for sending later:

Display shows AUTOMATIC RX

Start	MEMORY TX
	MEMORY TX
Function

FDisplay shows TX FROM MEMORY

Display shows ALREADY ENTERED

0-9

Start

Enter the time at which you want your fax to be sent, e.g. 18.30 or press the Start button to select the current time.

Display shows TYPE FAX NUMBER

Start

Start

Volume

Display shows PRINT SETTING?

Press to switch between this and the other

two options CHANGE PARAM? or CANCEL SETTING?

	0-9	Use the keypad to dial the number you
	0-9	want.
		want.

Press to select the option displayed.

PRINT – you get a print out of the fax details and then the machine returns to standby.

19

Image 21

BT 50 manual To broadcast a document, To fax from memory, To change, re-send or cancel a stored document, FAX Number . If

Contents

PaperJet User GuidePage Page Control panel At a glance PaperJet Print head holder Optical scanner Key features This guide Introduction Unpacking your PaperJetFor your records Safety information Setting up Fit the paper supportConnect the telephone line cord Connect the mains power Load paperAutomatic RX Check Print Head Install the starter print cartridge If necessary, check the paper size settingShows FAX SET Shows Printer Check Print OUT = Exit 0 = Repeat Automatic print quality test Set the date and time Shows InstallationEnter your name and fax number Display shows Format DD/MM/YY Display shows Various Settings To set the position of your fax headerShows FAX SET-UP Using your PaperJet Setting the contrast and resolutionSending faxes To display Date and Time To display Various Settings To select the default resolution settingTo dial and hear the progress of your fax call To send a fax To dial using the handset To switch document retransmission on/offTo redial the last number To change the details of a pre-set fax To send a fax at a pre-set time delayed faxingHhmm TX AT To broadcast a document To change, re-send or cancel a stored documentTo fax from memory FAX Number . If Receiving faxes Dial Using the one-touch memoriesANOTHER? YES To store a one touch entry Using the speed-dial memories To edit or delete a one-touch entry To send a one-touch faxTo store a speed dial entry To edit or delete a speed dial entry To send a speed dial faxFAX Call Code or Reports and lists Report Delay List OFFREP on Last TX Report BROAD. REP Activity Report SET UP To print the configuration, speed dial and one-touch listsMaking and receiving phone calls To print the set-up list To make a speed dial call To put a caller on holdTEL Call Code or To copy a document Copying documentsTo stop copying 100% Text Normal To set the print quality Additional featuresTo set the print area of a document High Qual To receive a document longer than the paper size To adjust the ringer volumeDisplay shows TEL.LINE SET-UP On and OFF Start TIMER20 To adjust the duration of the phone call alert beepsTo change the remote start code Pstn To adjust the loudspeaker volume To adjust the speed a fax is sent atInstallation Monitor on To switch ECM mode on/off PollingTo poll a document from another fax machine To change a polling time and number To display Cancel SETTING?Polling TX SET Number Connecting an answering machine To set the receive modeTo set up your answering machine To change the silence detection time If your fax machine interrupts when messages are being left To set the dialling mode and access number Connecting to a switchboardPBX EXT. Line Prefix To switch dialling mode during a call Using the External button Help Your machine does not receive faxes automatically You cannot print faxes or copy documentsYour machine prints out completely blank copies Receiver does not Answer Error codes Error messages Memory capacity Beeps Cleaning your PaperJet MaintenanceChanging the printhead/cartridge assembly Changing the printhead/cartridge Changing the ink cartridge Shows Head Maintenance To clean the print head and nozzlesManually cleaning the printhead contacts NEW Head OFF Cleaning the optical scanner Cleaning the print head pad Removing jammed pages Press Technical information Dimensions TTE Index Page Page Offices worldwide