To adjust the duration of the phone call alert beeps, Pstn | BT 50

PaperJet 50 User Guide 26/7/01 10:20 am Page 31 user guide – Edition 3 – 29.8.00

To adjust the duration of the phone call alert beeps

When your PaperJet 50 is set to PHONE/FAX RX mode it automatically answers all calls. If it is a phone call, it is set to beep for 20 seconds to alert you to pick up the handset. You can adjust the duration of these beeps.

Function

FPress until the display shows INSTALLATION

Display shows TEL.LINE SET-UP

Start

Press until the display shows FAX/TEL

Start TIMER:20

To change the remote start code

Function

FPress until the display shows INSTALLATION

Press until the display shows PUB.LINE

Start		(PSTN)
		(PSTN)
		If connected to a switchboard, press the >
		button to display PRIV. LINE (PBX).
		Press until the display shows REMOTE
		Press until the display shows REMOTE
Start		START: ON

Press to switch between ON and OFF. If you

Volume

select Off, you will not be able to enter a code on the attached phone to receive a fax.

Volume

Start

Stop

Press to switch between the options of 15,

20, 30 and 40 seconds.

Press to confirm the option displayed.

To return to standby.

			Display shows TYPE CODE
	Start		Display shows TYPE CODE
	0-9		Enter the 0-9digit you want after the ✱.
	0-9		It is shown in the display, e.g. *8 Note that
			It is shown in the display, e.g. *8 Note that
			the first ✱ cannot be changed.
			Press to confirm.

	Start
	Start
			To return to standby.

Receiving a fax call via an extension phone (Remote Start)

If you answer a call on an extension phone connected to the same line as your PaperJet 50 and you hear fax tones, you can switch your PaperJet 50 into fax receive mode by dialling ✱ 5. This is like pressing the Start button.

When you hear your PaperJet 50 respond with its own fax tones, hang up the extension phone.

You can replace the 5 of this code with any digit from 0-9.

Stop

31

Image 33

BT 50 To adjust the duration of the phone call alert beeps, To change the remote start code, Start TIMER20, Pstn, Start on

Contents

PaperJet User GuidePage Page Control panel At a glance PaperJet Print head holder Optical scanner Key features This guide Introduction Unpacking your PaperJetFor your records Safety information Setting up Fit the paper supportConnect the telephone line cord Connect the mains power Load paperAutomatic RX Check Print Head Install the starter print cartridge If necessary, check the paper size settingShows FAX SET Shows Printer Check Print OUT = Exit 0 = Repeat Automatic print quality test Set the date and time Shows InstallationEnter your name and fax number Display shows Format DD/MM/YY Display shows Various Settings To set the position of your fax headerShows FAX SET-UP Using your PaperJet Setting the contrast and resolutionSending faxes To display Date and Time To display Various Settings To select the default resolution settingTo dial and hear the progress of your fax call To send a fax To dial using the handset To switch document retransmission on/offTo redial the last number To change the details of a pre-set fax To send a fax at a pre-set time delayed faxingHhmm TX AT To broadcast a document To change, re-send or cancel a stored documentTo fax from memory FAX Number . If Receiving faxes Dial Using the one-touch memoriesANOTHER? YES To store a one touch entry Using the speed-dial memories To edit or delete a one-touch entry To send a one-touch faxTo store a speed dial entry To edit or delete a speed dial entry To send a speed dial faxFAX Call Code or Reports and lists Report Delay List OFFREP on Last TX Report BROAD. REP Activity Report SET UP To print the configuration, speed dial and one-touch listsMaking and receiving phone calls To print the set-up list To make a speed dial call To put a caller on holdTEL Call Code or To copy a document Copying documentsTo stop copying 100% Text Normal To set the print quality Additional featuresTo set the print area of a document High Qual To receive a document longer than the paper size To adjust the ringer volumeDisplay shows TEL.LINE SET-UP On and OFF Start TIMER20 To adjust the duration of the phone call alert beepsTo change the remote start code Pstn To adjust the loudspeaker volume To adjust the speed a fax is sent atInstallation Monitor on To switch ECM mode on/off PollingTo poll a document from another fax machine To change a polling time and number To display Cancel SETTING?Polling TX SET Number Connecting an answering machine To set the receive modeTo set up your answering machine To change the silence detection time If your fax machine interrupts when messages are being left To set the dialling mode and access number Connecting to a switchboardPBX EXT. Line Prefix To switch dialling mode during a call Using the External button Help Your machine does not receive faxes automatically You cannot print faxes or copy documentsYour machine prints out completely blank copies Receiver does not Answer Error codes Error messages Memory capacity Beeps Cleaning your PaperJet MaintenanceChanging the printhead/cartridge assembly Changing the printhead/cartridge Changing the ink cartridge Shows Head Maintenance To clean the print head and nozzlesManually cleaning the printhead contacts NEW Head OFF Cleaning the optical scanner Cleaning the print head pad Removing jammed pages Press Technical information Dimensions TTE Index Page Page Offices worldwide