Alpine CDA-9811, CDA-9813, CDA-9815 owner manual Setup, Sound Customizing, Visual Customizing, 23-EN

SETUP

You can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from Sound Customizing, Visual Customizing, etc., to select your desired setting.

SOURCE/	BAND/TEL.	Rotary encoder
POWER

g f F/SETUP

The common operation for SETUP is step 1 to 4 as follows. See down below for further information about each SETUP menu.

1 Press and hold F/SETUP for at least 3 seconds.

SETUP mode is activated.

2 Press g or f to select the desired SETUP menu.

(e.g. Select BEEP)

Here is the explanation for CDA-9815 display example.

NORMAL/HI-FI/STABLE → DIMMER*2 → SUB-W → SUB-W STEREO/SUB-W MONO*2 → CD-DA / CD-DA/MP3 →

BEEP → SCROLL → SCROLL TYPE*1 → MUTE → INTERRUPT → AUX → (AUX name)*3 → PWR-IC → CONTRAST*1 → FONT*1 → AREA *4→ DEMO → NORMAL/HI-FI/STABLE

*1 CDA-9815 only.

*2 CDA-9815/CDA-9813 only.

*3 Displayed only when AUX is ON. *4 “Radio” (page 8)

3 Press BAND/TEL. to change the setting.

(e.g. Select BEEP ON or BEEP OFF.)

4 Press F/SETUP again.

The display returns to normal mode.

Sound Customizing

Switching the Tuner Mode

NORMAL (Initial setting) / HI-FI / STABLE

This unit incorporates the MAX TUNE SQ for the highest quality tuner audio. Moreover, you can choose between three settings to suit your own personal sound preferences and usage.

NORMAL: Standard setting

HI-FI: Sound quality priority setting

STABLE: Noiseless priority setting

•If you find the sound is very noisy while listening to the tuner in Hi- Fi mode, we recommend you change to Normal mode.

Subwoofer On and Off

SUB-W ON (Initial setting) / SUB-W OFF

When the subwoofer is on, perform the steps below to adjust the subwoofer output phase and level.

1Press the Rotary encoder repeatedly to select the SUB-W mode.

SUB-W → BALANCE → FADER → DEFEAT → VOLUME → SUB-W

2Press g or f.

The subwoofer output phase is toggled SUB-W NORMAL (0°) or SUB-W REVERS (180°).

To adjust the level, turn the Rotary encoder.

Setting the Subwoofer Output (CDA-9815/CDA-9813 only)

STEREO (Initial setting) / MONO

You can set the subwoofer output to stereo or monoaural. Make sure to set the correct output for your subwoofer type.

STEREO: Subwoofer stereo (L/R) output

MONO: Subwoofer monaural output

Sound (Beep) Guide Function

BEEP ON (Initial setting) / BEEP OFF

This function will give audible feedback with varying tones depending upon the button pressed.

Visual Customizing

Dimmer Control (CDA-9815/CDA-9813 only)

DIMMER AUTO (Initial setting) / DIMMER MANUAL

Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON.This mode is useful if you feel the unit's backlighting is too bright at night.

Scroll Setting

SCROLL AUTO / SCROLL MANUAL (Initial setting)

This CD player can scroll the disc and track names recorded on CD- TEXT discs, as well as the text information of MP3/WMA files, folder names, and tags.

SCROLL AUTO : The CD text information, the text information of folder and file names, and the tags are scrolled automatically.

SCROLL MANUAL : The display is scrolled only when a disc is loaded or when a track is changed, etc.

•The unit scrolls CD text names, folder names, file names or tag display. The disc titles input manually (page 21) cannot be scrolled.

23-EN