Alpine CDA-9815, CDA-9813, CDA-9811 owner manual External Device, 24-EN

Scroll Type Setting (CDA-9815 only)

TYPE1 (Initial setting)/TYPE2

Two types of scroll can be selected.

TYPE1: The upper line and lower line scroll alternately.

TYPE2: The upper line and lower line scroll at the same time, but at different speeds, when the “Scroll Setting” (page 23) is set to “SCROLL AUTO.”

Switching the Character Font (CDA-9815 only)

TYPE-1 (Initial setting)/TYPE-2

Two types of font can be selected.

You can select the font type you like.

Connecting to an External Amplifier

PWR-IC ON (Initial setting) / PWR-IC OFF

When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.

PWR-IC OFF : Use this mode when the front and rear pre- amplifier of the unit are used to drive an external amplifier connected to the speakers. In this setting, the head unit’s internal amplifier has no output to drive speakers.

Front

left

Amplifier

Front right

Adjusting Display Contrast (CDA-9815 only)

CONTRAST

You can adjust the display contrast for better visibility.

Amplifier

Rear left

Rear right

You can adjust in a range of - 6 and + 6.

• The initial setting at the factory is “0.”

Demonstration

DEMO ON/DEMO OFF (Initial setting)

This unit has a Demonstration feature which simulates the display functions.

• To quit Demo mode, set to DEMO OFF.

MP3

Playing MP3 Data

CD-DA (Initial setting)/CD-DA/MP3

This product can playback CDs containing both CD and MP3 data. However, in some situations (some enhanced CDs), playback may be difficult. For these special cases, you can select playback of CD data only. When a disc contains both CD or the MP3 data, playback starts from the CD data portion of the disc.

CD-DA : Only CD data can be played back.

CD-DA/MP3 : Both CD data and MP3/WMA file tracks can be played back.

•Perform this setting before inserting a disc. If a disc has already been inserted, perform the setting after you remove the disc. (If you use an MP3 changer, you have to change discs.)

External Device

Turning Mute Mode On/Off

MUTE ON (Initial setting)/ MUTE OFF

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.

Setting the AUX Mode (V-Link)

AUX ON / AUX OFF (Initial setting)

You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA- 410C) to this component.

You can change the AUX name display when AUX ON is set. Select the AUX name by pressing g or f. Then press BAND/TEL. If the KCA-410C is connected, it is possible to select two AUX names.

•Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND/TEL. to select your desired device.

(Connecting example for CDA-9815)

PWR-IC ON : The speakers are driven by the built-in amplifier.

Speakers

SPEAKER

RIGHT FRONTFront right

SPEAKER

RIGHT REARRear right

SPEAKER

LEFT REARRear left

SPEAKER

LEFT FRONTFront left

•No sound is produced by the system when the power output is set to OFF.

Setting Tone Defeat for External Devices

INTERRUPT ON / INTERRUPT OFF (Initial setting)

When inputting external devices to this unit, turning tone defeat on will bypass BASS,TREBLE, EQ and MX, i.e., sound for external devices is output at the default setting.

24-EN