Telephone mode will end and return to the original source mode.
• If there is no telephone number registered to a preset button, “NO PRESET” (“NO P-SET” for the CDA-9811) is displayed when you try to place a call.
28-EN
Press BAND/TEL. to end the call.
•
•
3
Within 5 seconds, press and hold (for at least 2 seconds) a preset button (1 through 6) to place a call.
By pressing F/SETUP, and then pressing a preset button (1 through 3) for at least 2 seconds, you can place a call to the number registered in 7 to 9.
You can place a call by pressing :/J after momentarily pressing the preset button (1 through 6) of the number you wish to call. You can place a call by pressing the Rotary encoder, after selecting a number which you wish to call, by pressing g or f , or by turning the Rotary encoder.
2
Press and hold BAND/TEL. for at least 2 seconds.
1
Telephone mode will end and return to the original source mode.
• If all telephone numbers and registered names cannot be displayed
at once, press TITLE / to show undisplayed numbers and names.
• “NO MEMORY” (“NO MEM” for CDA-9811) is displayed if nothing is registered in the Phone Book.
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone numbers registered in No. 1 to 9 of the address book.
Press BAND/TEL. to end the call.
Press the Rotary encoder to place a call.
4 Turn the Rotary encoder to select the addressee.
5
6
Telephone mode will end and return to the original source mode.
Retrieving an addressee by Selecting Search (A-Z search)
3 Press 8 or 9 to select an initial letter (A to Z) of the addressee.
Press BAND/TEL. to end the call.
5
Press :/J or Rotary encoder to place a call.
4
When displaying the Alphabetic Sort List, turn the Rotary encoder or press g or f to select the addressee.
3
A list in alphabetic order is displayed.
Retrieving an addressee by Alphabetic Sort List
to select Phone Book mode.
Press SEARCH
2
Press and hold BAND/TEL. for at least 2 seconds.
1
Calling
Calling by the address book
You can call up the address book registered in the portable telephone to call from.
Calling by the outgoing/incoming/absent incoming history
You can place a call to any of the last 999 calls by the outgoing/ incoming/absent incoming history.
Press SEARCH in Phone Book mode to select the History mode.
Press 8 or 9 to select outgoing history (display example: “DIALED”), incoming history (display example: “RECEIVED” ), absent incoming history (display example: “MISSED”).
3 Turn the Rotary encoder, or press g or f to select the addressee from the outgoing or incoming history.
Press :/J or the Rotary encoder to place a call.
Press BAND/TEL. to end the call.
Telephone mode will end and return to the original source mode.
•If all telephone numbers and registered names cannot be displayed
at once, press TITLE / to show undisplayed numbers and names.
•“NO MEMORY” (“NO MEM” for CDA-9811) is displayed if there is no incoming history.
SMS (Short Message Service) Operation
You can be informed when you receive a short message.
Receiving a short message
1 When a text message is received, “NEW MESSAGE” for CDA-9815, “NEW MESSAG” for CDA-9813 or “NEW MSG” for CDA-9811 is indicated on the display.
The contents of the received message can only be read from the portable phone's display.
2 Press any one of the buttons on the unit to cancel the display. The buttons that are pressed will enter the mode or will be activated.