Chapter 6: Local Management
6.6.13 Setting the Baud Rate
If SLIP or PPP is selected in the previous section, a separate field appears to the right of the Application field that allows the user to select the baud rate. Change the baud rate setting as follows:
1.Use the arrow keys to highlight the Baud Rate field.
2.Use the SPACE bar or BACKSPACE to step to the correct setting.
3.Press ENTER to accept the baud rate.
4.Use the arrow keys to highlight SAVE at the bottom of the screen, then press ENTER.
5.When the message “SAVED OK” appears, the edits are saved.
|
