Samsung 5400 Service Function Settings, Long Doc. Scan, 2 MDY/DMY, Time/Date Print, Tsi Print

Changing Your Dial Parameter Settings

1Press the Select Function key.

2Press the 9/User Program One Touch key.

3On the numeric keypad, press 2. The display shows

2:DIAL PARAMETER.

4Press the Yes ◀ key until the display shows the dial parameter you want to change.

5Repeatedly press the No ♣ key until the setting you want appears in the display.

6Press the Yes ◀ key to confirm your selection. The name of the next dial parameter setting appears in the display.

7Press the Select Function key to finish.

Service Function Settings

In many cases, service function settings greatly change the way your fax machine operates. To change any of these settings, contact your Authorized OKIFAX Dealer.

Service Function Settings List

1LONG DOC. SCAN

Normally fax machine does not scan documents longer than 14 inches (360 mm). When this function is on, your fax machine can scan and transmit documents of any length for up to one hour.

2MDY/DMY

This function specifies how fax machine displays and prints the date: month/day/year or day/month/year.

3TIME/DATE PRINT

This function specifies how the time and date are printed on the fax messages you transmit. Available settings are: do not print date and time, print date and time at the top of the first page only, and print date and time at the top of every page.

4TSI PRINT

When this function is on, the phone number of the sending fax machine prints at the top of each page of the message.

5NO TONER MEM.RX

When this function is on, your fax machine automatically receives messages in memory when it is low on toner.

Handbook 53