Samsung 5400 manual Tx Mode Default, 10 T/F TIMER PROG, Ring Response

09 TX MODE DEFAULT

Your fax machine is set for the STD (standard) resolution setting and the NORMAL contrast setting. If you consistently send faxes that require some other combination of transmission modes, use this function setting to change the default modes. While you are programming, the new default combinations appear on the lights above the Yes ◀ and the No ♣ keys. The default is

STD/NORMAL.

10 T/F TIMER PROG.

When set to the telephone/fax answering mode, your fax machine automatically distinguishes between incoming voice and fax calls. If the incoming call is a voice call, fax machine rings to tell you to pick up the handset. If you do not answer, fax machine automatically switches back to fax mode to allow the calling party to send a fax. The T/F TIMER function controls how long it waits before switching back to fax mode.

Available settings are 20 SECONDS or 35 SECONDS (default).

11 RING RESPONSE

This function controls how long your fax machine waits before answering an incoming telephone call. The available settings are 1 RING (default), 5 SECONDS, 10 SECONDS, 15 SECONDS, or 20 SECONDS.

!At the default 1-ring setting, your fax machine answers calls immediately, and you will not hear any ring. If you

need to hear the ring, change to one of the other settings.

Handbook 157