Samsung 5400 manual Sending a Fax to a Single Location, To dial using the numeric keypad

3Your fax machine will grip the documents and pull the bottom page into the machine.

4To obtain the best possible quality for the type of document you are scanning or faxing, use the Yes ◀ key to set the resolution of your document. For most normal documents, the default STD setting works well.

For normal office documents, use STD (Standard) resolution, which scans at 200 x 100 dpi

For documents with small type or other fine details, use

•FINE resolution, which scans at 200 x 200 dpi or

•EX. FINE resolution, which scans at 200 x 400 dpi For documents with photos or many shades of gray, use PHOTO resolution, which scans at 200 x 200 dpi

5If necessary, use the No ♣ key to adjust the level of contrast in your document.

For most documents, the default NORMAL setting works best.

•For documents with normal contrast, use NORMAL contrast.

•For documents that are too light, use LIGHT contrast.

•For documents that are too dark, use DARK contrast.

6Your documents are now ready for faxing or copying.

Sending a Fax to a Single Location

1Load your documents.

2Select a location. Refer to the instructions below. To dial using a One Touch key

Press the One Touch key. To reach One Touch keys 16– 30, lift the main One Touch key pad.

To dial using an Auto Dial number

Press the Auto Dial key, then enter the two-digit Auto Dial number on the numeric keypad.

To dial using the numeric keypad

Dial as you would on a normal telephone.

If you make a mistake, press the Yes ◀ key to go back and re-enter the number.

Press the Start key when you have finished entering numbers.

64 Handbook