Samsung 5400 manual Using the One Touch Keys for Dialing, List of One Touch Keys

11To continue programming One Touch keys, go back to Step 3. If you are finished programming, press the Select Function key.

12Lift off the plastic cover above the One Touch label. Using a pencil, write in the location name for your One Touch key(s). Then replace the cover.

Using the One Touch Keys for Dialing

To use a One Touch key for dialing, just press the appropriate One Touch key. For each key, you can program up to two telephone numbers: a primary number, which will always be dialed first, and an optional alternate number which will be automatically dialed if the first number is busy or if there is no answer. You can also use the Search key to find locations programmed into One Touch keys.

!The fax unit has keys 1– 15 available on the main One Touch panel, and keys 16–30 available beneath the

main One Touch panel. To access One Touch keys 16 – 30, lift the main One Touch keypad by the latch on the left side of the cover. When you’re finished, close the keypad to continue normal operation and programming.

Using the One Touch Keys for Selecting Functions and Programming

Use One Touch keys 1–10 for selecting special transmission and reception functions, for obtaining reports, and for quick access to programming functions.

To select a function:

1Press the Select Function key.

2Press the corresponding One Touch key.

List of One Touch Keys

1/Delayed TX key

Use this key to send a fax at a later time and date [which you specify (within three days)]. Refer to the “Advanced Operations, Sending a Fax at a Later Date and Time” section of this handbook.

2/Broadcast Feeder TX key

Use this key to send a fax to multiple locations or to switch from memory to the document feeder when preparing to send a fax. Refer to the “Sending a Fax to Multiple Locations (Broadcasting)” section of this handbook.

76 Handbook