Samsung 5400 manual Auto Dial key, Redial key, Hook/V. Request key, One Touch labels

programming or selecting other functions, pressing the Select Function key a second time takes you directly back to your fax machine’s standby mode.

7Auto Dial key

Auto Dial numbers are abbreviated numbers for rapid dialing. Rather than dialing the entire telephone number, you can enter a 2-digit Auto Dial number instead. You can also use the Location IDs (names) associated with Auto Dial numbers to search for these locations by name using the Search key.

8Redial key

Press this key to manually redial the last number dialed.

9Hook/V. Request key

Press this key to open a telephone line for manual dialing. You can hear the dialing through your fax machine’s speaker.

If you have an optional telephone handset or external telephone connected to your fax machine, you can also use this key to initiate or answer a request for voice communication during a fax communication. Press this

key while transmitting to signal the operator at the other fax machine that you want to talk to him or her at the end of your transmission or after reception of any page has been completed. To answer a voice request, press this key after lifting your telephone handset.

10 One Touch keypad

Each of the keys on this keypad can be programmed with a fax number. You can dial this number by pressing the corresponding key. Refer to the “ Programming Your Speed Dial Directory, One Touch Faxing“ section of this handbook for details. The keys are also used to control and program fax machine functions.

11 One Touch labels

After programming a location into a One Touch key, write the location’s name on the One Touch label. Lift off the plastic cover above the One Touch label, use a pencil to write in the name, then replace the cover.

34 Handbook