Samsung 5400 Changing Your User Function Settings, 22 PC/FAX SWITCH, One Touch Param, Handbook

22 PC/FAX SWITCH

This function is active only when the optional PC interface is installed and your fax machine is set to the PC Fax answering mode. In that case, incoming faxes are saved directly to the PC’s disk without being printed. If the PC is turned off or not functioning, the fax machine acts as a stand-alone fax machine and prints incoming faxes when this PC/FAX SWITCH function is set to ON (default). If this function is set to OFF, the fax machine will not accept incoming faxes when the PC is turned off or not functioning.

23 ONE TOUCH PARAM

This function allows you to activate the Echo Protection feature for a specific One Touch key, without changing the normal settings. Echo Protection can improve communication with a location in a noisy telephone area. For instructions on changing One Touch Parameters settings for a One Touch key, refer to the “Programming Your Speed Dial directory, One Touch Faxing” section of this handbook.

Changing Your User Function Settings

1Press the Select Function key.

2Press the 9/User Program One Touch key. The display shows

1:FUNC. PROGRAMMING.

3Press the Yes ◀ key. The display shows

FUNCTION NO. [ ].

4Using the numeric keypad, enter the 2-digit number of the function you want to change. The display shows the name of the selected function.

5Repeatedly press the No ♣ key until the setting you want appears in the display.

!If you are changing the TX MODE DEFAULT settings, the new settings appear on the lights above the Yes ◀ and the No ♣ keys

6Press the Yes ◀ key to confirm your selection. The name of the next function setting appears in the display.

7Press the Select Function key to finish.

160 Handbook