Philips MC230 Clock/Timer, Setting the clock, Viewing the clock, Setting the timer, English

Clock/Timer

Setting the clock

1In standby mode or system on, press and hold CLOCK SET on the remote control for more than 3 seconds.

➜SET CLOCK scrolls on the display.

➜The clock digits for the hours flash.

2Press VOLUME +/- to set the hours.

3Press CLOCK SET again.

➜The clock digits for the minutes flash.

4Press VOLUME +/- to set the minutes.

5Press CLOCK SET to confirm the time.

Note:

– The backlight for clock display is dim in standby.

Viewing the clock

Press CLOCK SET

➜The clock time is displayed.

Setting the timer

●The system can be used as an alarm clock, whereby the CD,TUNER is switched on at a set time.The clock time needs to be set first before the timer can be used.

●During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.

1In standby mode or system on, press and hold TIMER on the remote control for more than 3 seconds.

➜ SET TIMER and SELECT SOURCE scrolls on the display.

2Press SOURCE or VOLUME +/- to select sound source.

➜Display sequence shows CD, TUNER.

➜ flashes.

3Press TIMER to confirm your desired mode.

4Press VOLUME +/- to set the hours.

5Press TIMER again.

➜The clock digits for the minutes flash.

6Press VOLUME +/- to set the minutes.

7Press TIMER to confirm the time.

➜The timer is now set and activated.

Activating and deactivating

TIMER

●Press TIMER on the remote to turn off the timer or turn on to the last setting again.

➜If activated, the timer information will display for a few seconds, then the system resumes to the last active source or stays in standby mode.

➜If deactivated, “OFF” appears.

Note:

–The system will exit timer setting mode if no button is pressed within 90 seconds.

Activating and deactivating

SLEEP

The sleep timer enables the system to switch off by itself after a set period of time.

●Press SLEEP on the remote control once or

more.

➜ Display shows SLEEP and one of the sleep time options in sequence: 90, 75, 60,...,

45,30,15, OFF, 90. if you have selected a time. Once SLEEP is activated, SLEEP is display.

●To deactivate, press SLEEP on the remote control once or more until OFF is shown, or press STANDBY-ONon the system or remote control.

➜ OFF is displayed.

English

17