Philips MC230 Basic Functions, Switching the system on, Power Saving Automatic Standby, English

Basic Functions

IMPORTANT!

Before you operate the system, complete the preparation procedures.

Switching the system on

●Press STANDBY-ON / 2.

➜The system will switch to the last selected source.

●Press SOURCE (or CD, TUNER or AUX on the remote control).

➜The system will switch to the selected source.

●Press OPEN • CLOSEç.

Power Saving Automatic Standby

As a power-saving feature, the system automatically switches to Eco Power/ Standby 15 minutes after a CD has reached the end and no control is operated.

Adjusting volume and sound

1Press the VOLUME 3 / 4 (+/-)control to decrease or increase the volume.

➜Display shows the volume level VOL and a number from MIN1, 2, ...30, 31 MAX.

2Press DSC repeatedly to select the desired sound effect: ROCK/ JAZZ/ POP/ CLASSIC.

3Press DBB to switch bass enhancement on or off.

➜Display shows: DBB.

4Press MUTE on the remote control to interrupt sound reproduction instantly.

➜Playback will continue without sound and the display shows MUTE.

●To activate sound reproduction you can:

–press MUTE again;

–adjust the volume controls;

–change source.

English

Switch the system to ECO Power Standby mode

●Press STANDBY-ON / 2.

➜"ECO PWR" will be displayed, then the display screen will go blank.

➜The ECO POWER LED will be lighted.

Note:

– To view clock time in standby mode. Press and hold STANDBY-ON for more than 3 seconds, the clock time is displayed dimly.

➜ The Eco Power indicator goes off.

●The volume level (up to a maximum volume level of 20), interactive sound settings, last selected mode, source and tuner presets will be retained in the player's memory.

11