Preparations
English
MW loop | FM wire antenna |
antenna |
|
Speakers | Speakers |
(right) | (left) |
AC power cord
Rear connections
The type plate is located at the rear of the system.
For users in the U.K.: please follow the instructions on page 2.
APower
Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
WARNING!
ÐFor optimal performance, use only the original power cable.
ÐNever make or change any connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
BAntennas Connection
Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
AM Antenna
●Position the antenna as far as possible from a TV, VCR or other radiation source.
8
