Samsung 5400 manual Mftone/Dp Pulse, Pbx Line, Auto Start, Dial Prefix, Handbook

5MF(TONE)/DP (PULSE)

This function sets the dialing method. Use the MF setting for Touch-Tone dialing, or the DP setting for pulse dialing. Default: MF (TONE).

6PBX LINE

Turn this function on if your fax machine is connected to a PBX (Private Branch Exchange—a phone system used to route internal calls). Once this function has been turned on and the access digit function has been programmed using the Dial Prefix parameter (below), your fax machine recognizes the access digit you use in your PBX to get an outside line. Refer to Dial Parameter 8, Dial Prefix function for more information.

Refer to the “Setting Basic Features, Connecting to a PBX” section of this handbook for instructions on changing this setting.

Available settings are ON and OFF. Default: OFF.

7AUTO START

When this function is turned on, your fax machine automatically dials as soon as you press a One Touch key or enter an Auto Dial code—you do not have to press Start.

Available settings are ON and OFF. Default: ON.

8DIAL PREFIX

If your fax machine is connected to a PBX, use this function to specify the access digit used to obtain an outside line from your PBX. You can enter a number with up to four digits. When this parameter is programmed, the fax machine recognizes the access digit when you enter a number and automatically pauses for an outside line before dialing the rest of the number.

Refer to the “Setting Basic Features, Connecting to a PBX” section of this handbook for instructions on changing this setting.

Available settings are ON and OFF. Default: OFF.

162 Handbook