Press Start, then enter the location ID. This is a descriptive title up to 15 characters long. Refer to the instructions below.

To enter numbers, use the numeric keypad (press once)

To enter spaces, use the Space One Touch key

To enter hyphens (-), use the Hyphen key

To enter alphabetical characters, locate the character you want on the numeric keypad.

Press that key repeatedly until the character appears on the display.

To enter a unique character, press the 0/Unique key repeatedly until the character you want appears.

The following characters are available: ! # & ‘ ( ) * + , - .

/ : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.

To enter two successive letters/numbers on the same key, press the No key to move to the next character. Move the cursor to make corrections, press the Yes and No keys

6Press Start. The display shows

NO=<LOCATION>.

7Press Start. The display shows PROGRAMMING, then DIALING, and the fax machine dials the number and sends the fax.

Receiving Faxes

Receiving Faxes Manually

If your fax machine is set to the manual receive [TEL] mode, it treats all incoming calls as voice conversations, and does not automatically receive faxes.

!You must have a handset connected to the fax machine in order to receive faxes manually.

To receive a fax while in manual receive mode:

1When your telephone or fax machine rings, pick up the telephone handset connected to it. If a person is on the line, carry on your conversation.

68 Handbook

Page 68
Image 68
Samsung 5400 manual Receiving Faxes Manually, No=Location