Samsung 5400 manual Remote Diagnosis, Changing Your User Function Settings

The Error Correction Mode (ECM) function may help your fax machine improve communication in areas where telephone line conditions are marginal. Refer to the “Problem Solving” section of this handbook for other suggestions if you have communication problems.

Available settings are ON (default) and OFF.

21 REMOTE DIAGNOSIS

The remote diagnostics feature allows a service person remotely to dial and service your fax machine.

Available settings are ON and OFF (default).

22 PC/FAX SWITCH

This function is active only when the Multifunction Printer Option is installed and your fax machine is set to the PC Fax answering mode. In that case, incoming faxes are saved directly to the PC’s disk without being printed. If the PC is turned off or not functioning, the fax machine acts as a stand-alone fax machine and prints incoming faxes when this PC/FAX SWITCH function is set to ON (default). If this function is set to OFF, the fax machine will not accept incoming faxes when the PC is turned off or not functioning.

23 ONE TOUCH PARAM

This function allows you to activate the Echo Protection feature for a specific One Touch key, without changing the normal settings. Echo Protection can improve communication with a location in a noisy telephone area. For instructions on changing One Touch Parameters settings for a One Touch key, refer to the “Programming Your Speed Dial directory, One Touch Faxing” section of this handbook.

Changing Your User Function Settings

1Press the Select Function key.

2Press the 9/User Program One Touch key. The display shows

1:FUNC. PROGRAMMING.

3Press the Yes ◀ key. The display shows

FUNCTION NO. [ ].

50 Handbook