6After the display clears, enter the fax number. Refer to the instructions below.

To enter numbers, use the numeric keypad (press once)

To enter spaces, press the 14/Space One Touch key

To enter hyphens (-), press the Hyphen key

To enter pauses (i.e., to wait for long distance or outside lines), press the 15/Pause One Touch key

To add a switch from pulse to tone dialing for part of the call, press the */Tone key

To move the cursor to make corrections, press the Yes and No keys

7Press the Start key to register the number.

8Enter the Location ID. This is a descriptive title up to 16 characters long. Refer to the instructions below.

To enter numbers, use the numeric keypad (press once)

To enter spaces, press the 14/Space One Touch key

To enter hyphens (-), press the Hyphen key

To enter alphabet characters, locate the character you want on the numeric keypad. Press that key repeatedly until the character appears in the display.

To enter a unique character, press the 0/Unique key repeatedly until the character you want appears in the display. The following characters are available: ! # & ‘ ( ) * + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.

To enter two successive letters/numbers on the same key, press the No key to move to the next character.

To move the cursor to make corrections, press the Yes

and No keys

9Press the Start key to finish programming the One Touch Key. The display shows

AUTO DIAL NO. [ ]

10To continue programming Auto Dial numbers, go back to Step 4. If you are finished, press the Select Function key.

80 Handbook

Page 80
Image 80
Samsung 5400 manual Auto Dial no