Samsung 5400 manual Dial Parameter Settings List

4Using the numeric keypad, enter the 2-digit number of the function you want to change. The display shows the name of the selected function.

5Repeatedly press the No ♣ key until the setting you want appears in the display.

!If you are changing the TX MODE DEFAULT settings, the new settings appear on the lights above the Yes ◀ and the No ♣ keys

6Press the Yes ◀ key to confirm your selection. The name of the next function setting appears in the display.

7Press the Select Function key to finish.

Dial Parameter Settings

These functions allow you to control the way your fax machine dials telephone numbers. Refer to the Dial Parameter Settings List below to determine which settings you may need to change, then refer to “Changing Your Dial Parameter Settings” part of this section to make the change.

Dial Parameter Settings List

1REDIAL TRIES

This function controls how many times your fax machine automatically redials a number that is busy or does not answer.

Available settings are from 0 to 10 tries. Default: 3 tries.

2REDIAL INTERVAL

This function controls how long your fax machine waits between each automatic redial attempt.

Available settings are from 1 to 6 minutes. Default: 3 minutes.

3DIAL TONE DETECT

This function allows your fax machine to wait for and detect a dial tone before proceeding with dialing. Available settings are ON and OFF.

Default: OFF.

4BUSY TONE DETECT

This function allows your fax machine to detect a busy tone when sending a fax.

Available settings are ON and OFF. Default: ON.

Handbook 51