59
RQT9306
Setting menus

Changing the unit’s settings

You can change the unit’s settings using Setup menu.
≥The settings remain intact even if you switch the unit to standby.
1While stopped
Press [FUNCTION MENU].
2Press [3,4] to select “Others” and
press [OK].
3Press [3,4] to select “Setup” and
press [OK].
4Press [3,4] to select the tab and
press [1].
5Press [3,4] to select the menu and
press [OK].
6Press [3,4] to select the option and
press [OK].
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
∫Favourites Edit
You can create four Favourites of channels for making viewing and
recording easier. Editing these Favourites does not affect the
channel setting itself.
≥Timer recording may not work correctly if you edit the Favourite
during timer recording standby.
To add channels to a Favourite
1Press [3,4] to select the channel in the “All Channels” column
and press the “Yellow” button.
≥Repeat this step to add other channels.
≥Press the “Blue” button to add all the available channels to the
Favourite. (This function is available only when no channels
have been added to the Favourite.)
2Press [OK] to save the Favourite.
To change the order of channels of a Favourite
1Press [1]§.
2Press [3,4] to select the channel in the “Favourite” column to
move and press the “Green” button.
3Press [3,4] to select the new position of the channel and press
the “Green” button.
≥Repeat the steps 2 – 3 to move other channels.
4Press [OK] to save the Favourite.
To delete channels on a Favourite
1Press [1]§.
2Press [3,4] to select the channel in the “Favourite” column and
press the “Yellow” button.
≥Repeat this step to delete other channels.
≥Press the “Blue” button to delete all the channels from the
Favourite.
3Press [OK] to save the Favourite.
Deleting a channel from a Favourite does not affect the channel
itself. You can still select the channel from the “All Channels”
category.
To change the name of a Favourite in the “Favourite”
column
1Press [1]§.
2Press the “Red” button.
(>44, Entering text)
§ When the station name of the “All Channels” column is highlighted
∫Auto-Setup Restart
Download from TV
You can restart auto channel setting if set up (>9) fails for some
reason.
However, if you perform “Auto-Setup Restart”, the order of analogue
channels will change.
Select “Download from TV” when you connect the unit to a VIERA
Link (HDAVI Control 3 or later) compatible TV with an HDMI cable.
When the confirmation screen appears
1Press [2,1] to select “Yes” and press [OK].
When the Region Selection screen appears on the television
2Press [3,4] to select the region and press [OK].
You can also use the following method to restart Auto Setup.
When the unit is on and stopped
Press and hold [XCH] and [CHW] on the main unit until the
Auto-Setup screen appears.
All the settings except for the ratings level, ratings password, clock
settings and remote control code return to the factory preset. The
timer recording programmes are also cancelled.
∫Settings for Digital Channels
Press [OK] to show the following settings.
DVB Manual Tuning
You can set channels manually that the DVB Auto Setup could not
complete successfully.
1Press [3,4] to select “DVB Manual Tuning” and press [OK].
2Press [3,4] to select the channel you want to set.
3Press [2,1] to adjust the frequency.
≥The frequency rises and falls in steps of 0.5 MHz.
≥Adjust the frequency by checking the signal strength and signal
quality displays.
[Refer to “Signal Condition” (>60) for signal quality and signal
strength.]
4Press [OK] to start scan.
The set channel is displayed in the table.
5Press [EXIT] and press [WXCH] to check that applicable
channels have been selected.
Add New DVB Channels
You can search for newly added terrestrial digital channels to
receive.
1
Press [
3
,
4
] to select “Add New DVB Channels” and press [OK].
The unit starts searching for
newly available terrestrial
digital channels. This takes
about 5 minutes.
A message is displayed
when the search is finished.
“No new DVB channels found.” is displayed when no new
channels can be found.
2Press [OK] to save the newly found channels.

Common procedures

Tuning

Press the “Green” button to
select the Favourite.
Tabs Menus Options
Setup Remote Control
Clock
DivX Registration
System Update
DVD 1
Setting for Standby
Disc
Picture
Sound
Display
Tuning
Connection
Others
OK RETURN
TAB
SELECT
Initialize
Favourites Editor
RETURN
SELECT
Favourite Select
Add All Add
All Channels
2 ABC
20 ABC HDTV
Favourite 1
DVB Manual Tuning
Physical Channel
MHz
NewChannel Name Type
RETURN
010
010
[CH35] 578,5
Signal Quality
Signal Strength
OFFSET
START SCAN
CH
TV : 0 Radio : 0 Data : 0
No.
Add New DVB Channels
Scan CH 6 69
CH QualityChannel Name Type
DMREX79GN-RQT9306-L_eng.book 59 ページ ２００９年３月２４日　火曜日　午後２時３８分