On the unit’s display
The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.
DVD | ≥The remote control and main unit are using different codes. Change the code on the remote control. |
| ||
(“∑” stands for a number.) |
|
| Press and hold [OK] and the indicated number button at the same time for more than 5 |
|
|
|
|
| |
|
|
| seconds. (> 64) |
|
|
|
|
|
|
|
|
|
|
|
GUIDE | ≥TV Guide data is being downloaded. (> 64) |
| ||
|
|
|
|
|
HARD ERR§ | ≥If there is no change after turning the unit on and off, consult the dealer where the unit was purchased. |
| ||
|
|
|
|
|
NoERAS | ≥You cannot delete items on this disc. |
| ||
|
| The disc may be damaged. Use a new disc. |
| |
NoREAD | ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit. (> 13) |
| ||
| ≥This message may appear when the DVD lens cleaner has finished cleaning. |
| ||
|
| Press [< OPEN/CLOSE] on the main unit to eject the disc. (> 5) |
| |
NoWRIT | ≥You cannot write to this disc. |
| ||
|
| The disc may be damaged. Use a new disc. |
| |
PLEASE WAIT§ | ≥There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying out its |
| ||
|
| recovery process. This process restores the unit to normal operation. The unit is not broken. Wait until the |
| |
|
| message disappears. |
| |
PROG FULL§ | ≥There are already 32 timer programmes. Delete unnecessary timer programmes. (> 25) |
| ||
|
|
|
|
|
REMOVE | ≥The USB device is drawing too much power. Remove the USB device. |
| ||
|
|
|
|
|
SP 35:50 | ≥Available space on the HDD or disc. |
| ||
LP 151h |
| The example “SP 35:50” is displayed when less than 100 hours are available and the example “LP 151h” is |
| |
“SP”, “LP” and the |
| displayed when over 100 hours are available. |
| |
numbers are examples. |
| “SP” and “LP” are recording modes, “35:50” means “35 hours 50 minutes” and “151h” means “151 hours”. |
| |
|
|
|
|
|
≥The unit is performing a software update. (> 64) |
| |||
|
|
|
|
|
UNFORMAT§ | ≥You inserted an unformatted |
| ||
|
| that has been recorded on other equipment. |
| |
|
| Format the disc to use it. |
| |
|
| However all the recorded contents on the disc are deleted. (> 57) |
| |
UNSUPPORT§ | ≥You have inserted a disc the unit cannot play or record on. (> |
| ||
| ≥You tried to operate with a |
| ||
F74 | ≥The HDMI connection could not be authenticated due to a transfer malfunction. |
| ||
|
| Consult the dealer where the unit was purchased. |
| |
F75 | ≥The HDMI connection could not be authenticated due to an internal data malfunction. |
| ||
|
| Consult the dealer where the unit was purchased. |
| |
U59 | ≥The unit is hot. |
| ||
|
| The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears. |
| |
|
| Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear of the unit. |
| |
U61 | ≥(When a disc is not inserted) Displays when a malfunction has occurred during recording, playback or copy. This |
| ||
|
| is displayed when the unit is in the recovery process to return to normal operation; it is not broken. Once the |
| |
|
| display clears you can use the unit again. |
| |
U76 | ≥HDMI cannot be output because this unit is connected to a model that does not support copyright protection. |
| ||
|
|
|
|
|
U80 | ≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. |
| ||
U81 |
| Now press [Í/I] on the main unit again to turn the unit on. |
| |
U99 |
|
|
|
|
U88 | ≥(When a disc is inserted) Displays when there was something unusual detected with the disc while recording, |
| ||
|
| playback or copy. This is displayed when the unit is in the recovery process to return to normal operation; it is not |
| |
|
| broken. Once the display clears you can use the unit again. (> 74) |
| |
Hor F | ≥There is something unusual. (The service number displayed after H and F depends on the unit’s condition.) |
| ||
| ≥Check the unit using the troubleshooting guide. If the service number does not disappear, do the following. |
| ||
|
| (> |
| |
|
| 1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it. |
| |
|
| 2. Press [Í/I] to turn the power on. (The unit may be fixed.) |
| |
|
| If the service number does not disappear despite after doing the above, request service from the dealer. Inform |
| |
|
| the dealer of the service number when requesting service. |
| |
X HOLD | ≥The Child Lock function is activated. | Reference | ||
|
| Press and hold [OK] and [RETURN ] at the same time until “X HOLD” disappears. (> 65) | ||
§ The message are alternately displayed.
RQT9306
73
