Panasonic DMR-EX79 quick start Still pictures

Troubleshooting guide

Music

Tracks could not be copied to the HDD.

¾If there are copyright protected tracks such as SCMS restrictions, they will not be copied.

¾Recording from CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.

¾Bonus tracks may not be copied.

ID3 tag of a MP3 file or WMA tag of a WMA file is not completely displayed.

¾Only the track name ([HDD] [USB]) and artist name ([HDD]) can be displayed with this unit.

Still pictures

Cannot display DIRECT NAVIGATOR screen.

¾This screen cannot be displayed during recording or copying.

Still pictures (JPEG) do not playback normally.

¾The images that were edited on the PC, such as Progressive JPEG etc., may not playback. (> 12)

USB

The contents of the USB memory cannot be read.

¾Remove the USB memory from the USB port and then insert again. If this does not solve the problem, turn off and turn on the unit again.

¾Check that the USB memory is inserted correctly. (> 13)

¾The format of the USB memory or of its contents is not compatible with the unit. (The contents on the USB memory may be damaged.) (> 11, 12)

¾The USB memory contains a folder structure and/or file extensions that are not compatible with this unit. (> 12)

¾Turn off and then turn on the unit again.

¾USB memories connected using a USB extension cable or a USB hub may not be recognized by this unit.

¾Some USB memories cannot be used with this unit. (> 11)

¾If inserted during playback, recording or copying etc., the USB memory may not be recognized by this unit.

RQT9306

TV Guide

The TV Guide System does not receive any data.

¾Check whether the clock is properly set. (> 64)

¾If signal quality is bad (ghost images or limited reception), the TV Guide system may not be able to receive any data.

“No Data” is displayed for some or all stations.

¾Some stations are not supported by the TV Guide system.

¾Analogue broadcasts are not supported by the TV Guide system.

¾Programme the Timer recording manually or via G-CODE. (> 23)

The TV Guide information is not displayed properly.

¾There was a programme change.

Check the current programme, e.g. on the Web site for the TV Guide system provider or station provider.

¾Programme information about analogue broadcasts is not displayed.

The TV Guide data transfer was interrupted.

¾The TV Guide system shows the data that was received up to the interruption.

¾The programme information may be incomplete.

The TV Guide data is not updated.

¾Make sure that the time is set correctly.

¾Check whether “Off” is set under “TV Guide Download in Standby” and change the setting in the Setup menu. (> 64)

78