Samsung 5400 Incoming Call Parameters, Ring Response User Function, Incoming Ring User Function

Incoming Call Parameters

Ring Response: User Function 11

This function controls how long your fax machine waits before answering an incoming telephone call. The available settings are 1 RING (default), 5 SECONDS, 10 SECONDS, 15 SECONDS, or 20 SECONDS.

!At the default 1-ring setting, your fax machine answers calls immediately, and you will not hear any ring. If you

need to hear the ring, change to one of the other settings.

Incoming Ring: User Function 16

This function controls the telephone ringing sound your fax machine makes when a call comes in. When set to off, it does not ring during incoming calls. The available settings are:

•ON (default): Only rings when set to Manual Receive [TEL] mode or when the RING RESPONSE function is set to 5, 10, or 20 seconds.

•OFF: Does not ring when a call comes in.

•DRC (distinctive ring cancel): Rings for each incoming call with the same tone, even if you have set function setting 12, DISTINCTIVE RING to on.

Distinctive Ring: User Function 12

Some telephone carriers offer a service called Distinctive Ring. Distinctive Ring lets you have different numbers on one line, each with its own distinctive ring. You can then use one number exclusively as a fax number without the expense of a second line. (Your local telephone carrier can provide you with more information about this service, which usually has an additional charge.) To use this function, refer to Setting Your Fax Machine’s Ring Pattern below. Available settings are OFF (default) and ON.

!You must have your local telephone carrier’s Distinctive Ring service.Your fax machine must be in FAX or PC

answer mode, and the PBX dial parameter must be set to OFF. Other modes—TEL, TEL/FAX, or TAD—will override Distinctive Ring.This feature may not work properly if you have a telephone other than a genuine Oki optional handset connected to your fax machine.

Handbook 57