Pioneer PRV-9200 Video In / Out settings, Input Colour System, Component Video Out

13The Initial Setup menu

1 Select ‘VCR Plus+ CH Setting’, then ‘Next Screen’.

Initial Setup
Basic	Auto Channel Setting	Next Screen
Tuner	Manual CH Setting
Video In/Out	VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback

2Assign channel numbers to the guide channels as necessary.

Look in your TV guide to see which channel numbers should be assigned to which guide channels.

Initial Setup
Basic	VCR Plus+ CH Setting				1/20
	Auto Channel Setting
Tuner	Manual CHGuideSetting	CH		Guide	CH
Video In/Out	VCR Plus+ CH Setting		6	6
Audio In	1
	2			7
Audio Out
	3			8
Language
	4			9
Recording
	5			10
Playback

• Use the	(cursor up/down) buttons to change
the guide channel for setting.
• Use the	(cursor left/right) buttons to change

the channel number.

•Use the PREV / NEXT button to display the previous/ next 10 guide channels.

3 To return to the Initial Setup menu, press ENTER.

Video In / Out settings

Input Colour System

• Default setting: Auto

Initial Setup
Basic	Input Colour System	Next Screen
Tuner	Component Video
Video In/Out	NTSC on PAL TV
Audio In
Audio Out
Language
Recording
Playback

On the default setting, the recorder automatically detects whether the video signal from the built-in tuner or from one of the external inputs is 3.58 NTSC, PAL–60, PAL or SECAM. You may, however, occasionally need to set it manually if the picture is not displayed properly.

1Select ‘Input Colour System’, then ‘Next Screen’.

2Use the CHANNEL +/– buttons or the INPUT SELECT button to switch between the built-in tuner and the external inputs.

3 Use the (cursor left/right) buttons to change the input colour system for the current input or built-in tuner.

2ch

Auto

•The available settings depend on the Input Line System setting (see Input Line System on page 96). The table below shows the different options available.

Input Line System	Built-in tuner	External input
525 System	3.58 NTSC	Auto
		3.58 NTSC
		PAL–60
625 System	Auto	Auto
	PAL	PAL
	SECAM	SECAM

Component Video Out

• Default setting: Interlace

You only need to make this setting if you connected this recorder to your TV using the component video jacks.

Initial Setup
Basic	Input Colour System	Interlace
Tuner	Component Video	Progressive
Video In/Out	NTSC on PAL TV
Audio In
Audio Out
Language
Recording
Playback

If your TV is compatible with progressive-scan component video, set this Progressive for the highest quality picture. If your TV is not compatible with progressive-scan video, leave it set to Interlace.

See also Progressive scan video in the glossary on page 120.

98

En