Combine, Preview, Move | Pioneer PRV-9200 manual

Copying and back-up

3Use the playback controls to find the place you want to divide the title.

Divide Title

3Repeat step 2 to combine more titles, or press RETURN to go back to the Copy List menu options.

Note

HDD

Divide

Back

Title 2

8/11Sun 4:00PM	2ch LP
Recording Time	0h32m55s
2-1	0.08.13.26

Play Pause

Divide

•When Frame Accurate is set to Off (see Frame Accurate on page 104), the following limitations apply when combining titles:

–Mixed aspect ratios (16:9, 4:3, 4:3 (letter box)) can’t be combined.

–Mixed recording modes (EP/MN1–6, LP/MN7–18, SP/MN19–31, FINE/MN32) can’t be combined.

You can use all the usual playback controls, including PLAY, PAUSE, scan ( , ), and slow-motion

( , ).

•Press RETURN or highlight Back and press ENTER to go back to the main Copy List screen, leaving the title intact.

4With ‘Divide’ highlighted, press ENTER to divide the title at the current playback position.

5Repeat steps 2 to 4 to divide other titles in the Copy List, or press RETURN to go back to the Copy List menu options.

Note

•When Frame Accurate is set to Off (see Frame Accurate on page 104), the divide points may move by up to half a second after selecting Divide.

Combine

Use this command to make a single title from two adjacent titles in the Copy List.

1Select ‘Combine’ from the Copy List menu options.

2 Use the (cursor left/right) buttons to select two adjacent titles from the Copy List to combine, then press ENTER.

HDD to DVD Copy

All

HDD	1	2	3	4

HDD

				1/3
Add	DVD 1	2	3	4
Erase
Ttl Name
Divide		Copy List	Total 1h30m	1/2
Combine

Conf List

Preview

Use this command to check the content of a title in the Copy List.

1Select ‘Preview’ from the Copy List menu options.

2 Use the (cursor left/right) buttons to select a title from the Copy List to preview, then press

ENTER.

The selected title starts playing. You can return to the Copy List screen by pressing STOP, otherwise playback will continue until the end of the Copy List.

•During preview, you can select a new thumbnail for the Disc Navigator by pressing NAVI MARK.

3Repeat step 2 to preview other titles, or press RETURN to go back to the Copy List menu options.

Move

Use this command to change the order of titles in the Copy List.

1 Select ‘Move’ from the Copy List menu options.

2 Use the (cursor left/right) buttons to select a title from the Copy List to move, then press ENTER.