13The Initial Setup menu

Input Line System

• Default setting: 525 System

Initial Setup

 

 

Basic

Clock Setting

525System

Tuner

Input Line System

625System

Video In/Out

On Screen Display

 

Audio In

Front Panel Display

 

Audio Out

Remote Control Set

 

Language

Setup Navigator

 

Recording

 

 

Playback

 

 

For standard NTSC or PAL–60 recording, leave the input line system to 525 System. When recording a PAL or SECAM signal through an external input, change to 625 System.

Note

If when this setting is changed, the screen goes blank (due to incompatibility with your TV), you can switch back by pressing and holding the front panel

+button then pressing DVD (also front panel) while the recorder is stopped.

When you switch the Line Input System setting the Copy List is erased. If you switch the setting using the

+button and DVD buttons as described above, there is no confirmation, so please use with care.

You can’t mix recordings of different TV line systems on the same disc.

When you change this setting, the Input Colour System setting also changes (see Input Colour System on page 98).

Changing the tuner country setting in the Setup Navigator or using the Auto or Manual Channel Setting functions may change the Input Line System setting.

On Screen Display

• Default setting: On

Initial Setup

 

 

Basic

Clock Setting

On

Tuner

Input Line System

Off

Video In/Out

On Screen Display

 

Audio In

Front Panel Display

 

Audio Out

Remote Control Set

 

Language

Setup Navigator

 

Recording

 

 

Playback

 

 

On the default setting, the recorder shows on-screen operation displays (Play, Stop and so on). Change to Off to hide these displays.

Front Panel Display

• Default setting: On

Initial Setup

 

 

Basic

Clock Setting

On

Tuner

Input Line System

Off

Video In/Out

On Screen Display

 

Audio In

Front Panel Display

 

Audio Out

Remote Control Set

 

Language

Setup Navigator

 

Recording

 

 

Playback

 

 

On the default setting, the time is shown in the front panel display when the recorder is in standby. Switch to Off to have the front panel display switch off completely when in standby.

Note

When set to Off, the display still lights dimly in standby when setting a timer recording, or during Auto Start Recording.

Remote Control Set

• Default setting: Recorder1

You only need to set this if you are using more than one Pioneer DVD recorder in the same room.

Initial Setup

 

 

Basic

Clock Setting

Recorder1

Tuner

Input Line System

Recorder2

Video In/Out

On Screen Display

Recorder3

Audio In

Front Panel Display

 

Audio Out

Remote Control Set

 

Language

Setup Navigator

 

Recording

 

 

Playback

 

 

So that each remote control operates only its own recorder, make this setting different for each recorder and remote in the room.

There are three different recorder IDs. When set to Recorder2 or Recorder3, the remote control mode is shown in the front panel display.

After selecting a new recorder ID, you have to confirm the

change by selecting Yes or No (use the (cursor left/right) buttons), then pressing ENTER.

Note that as soon as you change the recorder ID, the remote becomes inoperative until you change the remote to the same ID.

To set the remote, press and hold RETURN and a number button (1, 2 or 3) until the indicator on the remote lights.

96

En

Page 96
Image 96
Pioneer PRV-9200 Initial Setup menu, Input Line System, On Screen Display, Front Panel Display, Remote Control Set