Pioneer PRV-9200 Tuner settings, Setup Navigator, Auto Channel Setting, Manual CH Setting

The Initial Setup menu 13

Setup Navigator

• Default setting: n/a

Initial Setup
Basic	Clock Setting	Start
Tuner	Input Line System
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Remote Control Set
Language	Setup Navigator
Recording
Playback

The Setup Navigator appears automatically when you switch on the recorder for the first time (or after resetting the recorder). It is also available from the Initial Settings menu should you need it at any other time.

See also Switching on and setting up on page 25.

Tuner settings

Auto Channel Setting

• Default setting: Antenna

Initial Setup
Basic	Auto Channel Setting	Antenna
Tuner	Manual CH Setting	Cable
Video In/Out	VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback

Auto Channel Setting automatically tunes the built-in TV tuner to terrestrial broadcast TV channels or cable channels. Select Antenna or Cable, depending on how you receive your TV channels, then wait for the automatic tuning to finish.

Tuning

7/68

Cancel

After automatic tuning, a summary channel mapping screen is displayed.

	Initial Setup
Channel Mapping Antenna							1/3
CH	Skip	CH	Skip	CH	Skip	CH	Skip
		9	Off	17	Off	25	Off
2	Off	10	Off	18	Off	26	Off
3	Off	11	Off	19	Off	27	Off
4	Off	12	Off	20	Off	28	Off
5	Off	13	Off	21	Off	29	Off
6	Off	14	Off	22	Off	30	Off
7	Off	15	Off	23	Off	31	Off
8	Off	16	Off	24	Off	32	Off

Note

•If you want to cancel before tuning has finished, press ENTER.

•You can manually tune and skip blank channels using the Manual CH Setting, below.

Manual CH Setting

• Default setting: n/a

The channel skip function lets you skip channels where there is no station so that as you change channels using the CHANNEL +/– buttons or the number buttons, you only change to channels that have a station.

The manual tuning function allows you to manually tune to stations, should you need to.

Initial Setup
Basic	Auto Channel Setting	Next Screen
Tuner	Manual CH Setting
Video In/Out	VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback

1From the manual channel setting screen:

•Use the CHANNEL +/– button to change channels.

•If you want to skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.

•If you want to manually tune the displayed channel, change the AFT (Auto Fine Tuning) setting to Off, then move down to Level to manually tune to a station.

2ch

SkipOff

AFTOff

Level0

• To return to the Initial Setup menu, press ENTER.

VCR Plus+ CH Setting

• Default setting: n/a

Guide channels are used by the VCR Plus+ system so that the channel number specified in the VCR Plus+ programming numbers can be guaranteed to correspond to the correct station.

Press ENTER to return to the main menu screen.

97

En