Pioneer PRV-9200 operating instructions Language settings

The Initial Setup menu

•When playing a DTS audio CD, make sure that Stereo is selected using the AUDIO button. See Switching audio channels on page 43.

96kHz PCM Out

You only need to make this setting if you connected this recorder to an AV amp/receiver (or other component) using the digital output.

• Default setting: 96kHz		48kHz
Initial Setup
Basic	Digital Out	96kHz 48kHz
Tuner	Dolby Digital Out	96kHz
Video In/Out	DTS Out
Audio In	96kHz PCM Out
Audio Out	MPEG Out
Language
Recording
Playback

If your AV amp/receiver (or other connected component) is compatible with high sampling rate audio (88.2 / 96 kHz), set to 96kHz, otherwise set to 96kHz 48kHz. Check the manual that came with the connected component if you’re unsure whether it is compatible with high sampling rate audio.

MPEG Out

You only need to make this setting if you connected this recorder to an AV amp/receiver (or other component) using the digital output.

• Default setting: MPEG		PCM
Initial Setup
Basic	Digital Out	MPEG
Tuner	Dolby Digital Out	MPEG PCM
Video In/Out	DTS Out
Audio In	96kHz PCM Out
Audio Out	MPEG Out
Language
Recording
Playback

If your AV amp/receiver (or other connected component) is MPEG audio compatible, set to MPEG, otherwise set to MPEG PCM. Check the manual that came with the connected component if you’re unsure whether it is MPEG compatible.

13

Language settings

OSD Language

• Default setting: English

Initial Setup
Basic	OSD Language	English
Tuner	Audio Language	français
Video In/Out	Subtitle Language
Audio In	Auto Language
Audio Out	DVD Menu Language
Language	Subtitle Display
Recording
Playback

This sets the language of the on-screen menus and displays.

Audio Language

• Default setting: English

Initial Setup
Basic	OSD Language	English
Tuner	Audio Language	French
Video In/Out	Subtitle Language	Other
Audio In	Auto Language
Audio Out	DVD Menu Language
Language	Subtitle Display
Recording
Playback

This setting is your preferred audio language for DVD discs. If the language you specify here is recorded on a disc, the recorder automatically plays the disc in that language (although this depends on the Auto Language setting—see Auto Language below).

Choose Other if you want to specify a language other than English or French (see Selecting ‘Other’ languages on page 102).

Tip

•You can switch between the languages recorded on a DVD disc any time during playback using the AUDIO button. (This does not affect this setting.)

Subtitle Language

• Default setting: English

Initial Setup
Basic	OSD Language	English
Tuner	Audio Language	French
Video In/Out	Subtitle Language	Other
Audio In	Auto Language
Audio Out	DVD Menu Language
Language	Subtitle Display
Recording
Playback

101

En