Pioneer PRV-9200 Standard timer recording, Use, Cursor to the recording end time on the grid

Recording 06

•You can go back and reset the start time if you need to by pressing RETURN.

5 Use the			(cursor left/right) to move the
cursor to the recording end time on the grid.
			Recording start time
							Recording end time
	Easy Timer		Recording
		AM	PM
		11:00	12:00	1:00		2:00		3:00	4:00	5:00
	12/13
	12/14
	12/15
		12/13 MON			11:45 AM				1:45 PM
	CHANNEL +/– 32			REC MODE FINE					HDD/DVD	HDD

As you move the cursor around the grid, an arrow stretches from the start time to the current cursor position, representing the length of the recording. A recording of up to six hours can be set.

6Press ENTER to set the end time.

7Select ‘Yes’ to set the timer recording and exit, or ‘No’ to go back to the timer recording screen.

•You can check the timer recording details you just set from the main timer recording screen (see Standard timer recording below).

Standard timer recording

The timer recording screen you can see all the timer programs already set, clear programs and set up new ones.

CLEAR

ENTER

HOME

MENU

PREV NEXT

TIMER REC

1Press TIMER REC to display the Timer Recording screen.

You can also access the Timer Recording screen from the Home Menu (press HOME MENU, select Timer Recording, then Timer Recording (View)).

This screen shows all the timer programs currently set.

Timer Recording
Date	Start	Stop		CH	Mode			Rec to	Confirm
12/13 MON	7:00 PM	8:00 PM		32	FINE			HDD	OK
12/14 TUE	9:00 PM	10:00 PM		43	FINE			HDD	OK
			New	Input
HDD Remain						10h20m(FINE)				1/1
DVD Remain							0h43m(FINE)

•Each row is for one timer recording program, with the date and time information, channel, recording mode, DVD or HDD and recording status.

•The amount of free space available on the HDD and the currently loaded recordable DVD is shown towards the bottom of the screen.

•In the lower-right corner, the number of timer programs already set is shown next to Tmr Pgms.

•If there are more than eight timer programs already

set, press NEXT to switch page (go back using

the PREV button).

•You can also clear a timer program before it’s started (before the recorder enters timer recording standby) by highlighting it and pressing CLEAR.

2Select ‘New Input’ to set a new timer program, then press ENTER.

Timer Recording
Date		Start	Stop		CH	Rec Mode
12/12 SUN		10 00 AM	--	--	24	FINE
Rec to	Group
HDD		GROUP1	Program Set

Ttl Name Input

3 Enter the timer recording settings.

Use the	(cursor left/right) buttons to select a field;
use the	(cursor up/down) buttons to change the
value.

•Date – Choose a date up to one month in advance, or select a daily or weekly program.

•Start – Set the recording start time.

•Stop – Set the recording end time (maximum length of a timer recording is 24 hours for HDD recording or six hours for DVD).

•CH – Choose a channel (2–69 or 1–125 for antenna or cable channels respectively, excluding skip channels), or one of the external inputs from which to record.

49

En