![](/images/new-backgrounds/1190724/19072449x1.webp)
CHAPTER 3
INSTALLATION
Only qualified personnel should install the 8H02-16.
This chapter covers the following items:
•Required tools
•Unpacking the
•Installing the
•Connecting to the power source
•Connecting to the network
3.1REQUIRED TOOLS
A Phillips screwdriver is required to install the equipment.
3.2UNPACKING THE 8H02-16
To unpack the shipment, proceed as follows:
1.Carefully remove the
2.Visually inspect the
3.If there are any signs of damage, contact Cabletron Systems Technical Support. Refer to Section 1.7, Getting Help, for details.
|