7.If this is the fi rst time the radio is used a quick scan of UK Band 3 DAB channels will be carried out (or of the channels for the selected region, if different). The display will show "Auto tune selected...".
8.As new stations are detected during autotune the station counter on the right hand side of the display will increase and stations will be added to the list.
9.When the autotune is completed the fi rst station (in
10.If the station list is still empty after the autotune your radio will display "No Signal".
11.If you see the "No Signal" message or if no DAB radio stations are found it may be necessary to relocate your radio to a position giving better reception. You should then press the Scan button to rescan for DAB radio stations.
When your radio has tuned to a station, the signal strength indicator 
shows whether there is a strong or a weak signal present. Ideally, at least two bars should be showing for good reception.
Note: Your radio will remember the station last tuned to when you switch it off. In addition, if you were listening using the radio's auxiliary input, the radio will also remember that you were using it in that way. When you wish to listen to DAB radio again, press the Mode button to reselect DAB mode.
7