Roberts Radio Revwal manual Radio operation, Headphones

Page 5

Radio operation

Your radio is equipped with three wavebands to enable you to select the programme of your choice. The FM band uses an external telescopic aerial which should be fully extended and rotated for best reception. MW and LW bands are received by an internal aerial which is directional. To achieve the best reception, it may be necessary to rotate the radio.

1.Switch on the radio by rotating the volume control clockwise until a click is heard.

2.Depress the appropriate waveband button for FM MW or LW as required.

3.Tune to the desired programme by adjusting tuning control. On MW and LW the tuning scale is marked in kilohertz (kHz) and on FM in megahertz (MHz).

4.Adjust the volume and tone controls to the desired tone and sound level. Depressing the tone control button reduces high frequencies (treble).

Headphones

A3.5mm socket is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker.

2

1

3

4

4

5

Image 5
Contents Roberts Controls top panel Controls rear Using the AC adaptor Battery operationRadio operation HeadphonesDisplay backlight Circuit featuresCare GeneralGuarantee Roberts Radio Technical Services