Roberts Radio R9947 manual MW AM tuning step size

Page 15

MW (AM) tuning step size

In Europe and other parts or the world MW tuning steps are 9kHz, in America the MW tuning step size is 10kHz.

To change the MW tuning step size from 9KHz to 10KHz proceed as follows:-

1. Switch off your radio.

2. Press and hold down Tuning up button.

2

3. Whilst holding down the Tuning up button press the On/Off button.

To change tuning steps from 10kHz back to 9kHz repeat the above using the Tuning down button in step 2 instead of the Tuning up button.

1

3

If you need any further advice, please call our Technical Helpline on :-

14

020 8758 0338 (Mon-Fri)

 

Image 15
Contents R9947 Contents Controls front Controls left & right sides Display Inserting batteries Battery replacement Setting the clock Press the Time set button to complete time setting Setting the alarm time Press the Alarm button to complete the alarm time setting Switch off your radio using the On/Off button Wake to alarmSwitch on your radio by pressing the On/ Off button Operating your radio search tuningOperating your radio manual tuning MW AM tuning step size Presetting stations Recalling a preset station Sleep timer Display backlight Display ModesLock Switch Slide the Loudspeaker/Headphone EarphonesHeadphone socket on the left hand end AC Adaptor not included Mono button FM and via earphones only Troubleshooting/Reset button Power requirements SpecificationsGuarantee Roberts Radio Technical Services Department