Roberts Radio R9947 manual Troubleshooting/Reset button

Page 25

Troubleshooting/Reset button

If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.

1.Switch off the radio and remove the batteries.

2.With the aid of a suitable implement (the end of a paper clip) press the reset button located on the underside of your radio for at least 2 seconds, this will reset the micro- processor, clock time and clear all stations stored in preset memory.

If a problem persists our technical staff would be pleased to help offer any assistance on operating the radio. Our technical helpline number is, 020 8758 0338.

2

If you need any further advice, please call our Technical Helpline on :-

24

020 8758 0338 (Mon-Fri)

 

Image 25
Contents R9947 Contents Controls front Controls left & right sides Display Inserting batteries Battery replacement Setting the clock Press the Time set button to complete time setting Setting the alarm time Press the Alarm button to complete the alarm time setting Switch off your radio using the On/Off button Wake to alarmSwitch on your radio by pressing the On/ Off button Operating your radio search tuningOperating your radio manual tuning MW AM tuning step size Presetting stations Recalling a preset station Sleep timer Display backlight Display ModesLock Switch Slide the Loudspeaker/Headphone EarphonesHeadphone socket on the left hand end AC Adaptor not included Mono button FM and via earphones only Troubleshooting/Reset button Power requirements SpecificationsGuarantee Roberts Radio Technical Services Department