Roberts Radio R9967 manual Operating your radio Shortwave

Page 8

Operating your radio - Shortwave

1.Switch on your radio by sliding the Power On/ Off switch to the On position.

2.Slide the Waveband selector switch to the required SW band position.

For information on the most appropriate shortwave band refer to Shortwave Guide or BBC website at http://www.bbc.co.uk.

3.Adjust the Volume control until a hissing sound is heard.

4.Fully extend the Telescopic aerial.

5.Rotate the Tuning control to select the desired station. On SW the Tuning scale is marked in Megahertz (MHz).

6.Adjust the Volume to the required setting.

7.To switch off your radio slide the Power On/Off switch to the Off position.

12

35

6

7

7

Image 8
Contents R9967 Contents Controls front Controls left and right hand ends Batteries Slide the Waveband selector switch to the FM position Operating your radio FMSlide the Waveband selector switch to the MW or LW position Operating your radio Medium and Long waveOperating your radio Shortwave Headphones not included Mains adaptor not includedSpecifications Guarantee Roberts Radio Technical Services Department