Roberts Radio R9967 manual Headphones not included, Mains adaptor not included

Page 9

Headphones (not included)

A Headphone Socket (3.5mm) located on the left hand end of your radio is provided for use with either headphones or an earpiece. Inserting the headphone plug automatically mutes the internal loudspeaker.

Mains adaptor (not included)

The AC adaptor for use with the R9967 should provide between 3 and 6 volts DC output at 200mA centre pin negative.

Plug the lead from the adaptor into the DC socket located on the left hand end of your radio. Plug the adaptor into a mains outlet. The battery will be automatically disconnected

The mains adaptor should be disconnected from the mains supply when not in use.

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri)

8

Image 9
Contents R9967 Contents Controls front Controls left and right hand ends Batteries Operating your radio FM Slide the Waveband selector switch to the FM positionOperating your radio Medium and Long wave Slide the Waveband selector switch to the MW or LW positionOperating your radio Shortwave Mains adaptor not included Headphones not includedSpecifications Guarantee Roberts Radio Technical Services Department