Battery operation
1.Remove the Battery cover on the rear of the unit by pushing the battery door in and downwards.
2.Insert two LR6 (AA size) batteries into the small spaces under flap with yellow label. Insert four LR14 (C size) batteries into the remain- ing spaces in the compartment. Take care to ensure all batteries are inserted with the correct polarity as shown inside the battery com- partment. Replace the battery cover.
Note : The two LR6 (AA size) batteries provide power for the clock/memory backup and must be fitted at all times.
3.Reduced power, distortion and a ‘stuttering’ sound are all signs that the batteries may need replacing.
4.If the radio is not to be used for any extended period of time it is recommended that the batteries are removed from the radio.
We would recommend for economy that the R9999 is used on the mains whenever possible with battery operation for occasional or
Mains operation
1.Place your radio on a flat surface.
2.Plug the mains lead into the Socket located on the rear of your radio ensuring that the plug is pushed fully into the socket.
3.Plug the other end of the mains lead into a wall socket and switch on the wall socket.
Note: Your radio remains connected to the mains even when it is switched off. Your radio is only isolated from the mains if the mains plug is removed from the wall socket.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 6 |