Battery replacement, Rechargeable battery

Battery

Install two “AA” batteries (not supplied) as shown in Fig. 3. Observe proper polarity.

• If you are not going to use the unit with batteries for one month or more, remove the batteries.

Fig. 3

Battery replacement

When the BATT/OPR indicator (M-1110C only) does not light during operation or is lit dimly, replace the batteries.

•When replacing the batteries, use two new batteries of the same type. Do not mix a used battery with a new one or mix different types of batteries.

IMPORTANT NOTE:

SPENT OR DISCHARGED BATTERIES MUST BE RE- CYCLED OR DISPOSED OF PROPERLY IN COMPLI- ANCE WITH ALL APPLICABLE LAWS.

FOR DETAILED INFORMATION, CONTACT YOUR LO- CAL COUNTY SOLID WASTE AUTHORITY.

Rechargeable battery

Install the rechargeable battery (SANYO NBP-30B, not supplied) as shown in Fig. 4. Connect the AC adaptor. The battery fully charged approximately 8 hours af- ter the AC adaptor is connected.

•Do not charged continuously for 24

hours or more.

Fig. 4

-E3-