Press the Stop button to stop recording

Fig. 6

1. Load a cassette as shown in Fig. 6.

2. Press the reset button to set the counter to “000”. The counter shows relative tape position. (M-1110C only)

3. Set the VAS switch to ON or

OFF. (M-1110C only)

4. Press the REC button. (The PLAY button is engaged simultaneously.)

VAS ON: Voice activated re- cording (M-1110C only) When you talk, the unit will start

recording. When you stop talking for as long as 4 to 8 seconds, the unit will stop recording (variations in voice level do not stop recording).

Use the VOLUME control to adjust the microphone sen- sitivity to your voice. If voices are not activating recording, increase the volume. If recording does not stop when talking stops, decrease volume.

NOTE: If the first few words you speak activate record- ing but are not recorded, say an extra word to start re- cording before you dictate. (For important recordings, set the VAS switch to OFF.)

VAS OFF: Standard recording (M-1110C only) Recording will continue until the STOP button is pressed.

5. Press the STOP button to stop recording.

-E5-