Roberts Radio R983 manual Setting the HWS Humane Wake System alarm

Page 15

Setting the HWS (Humane Wake System) alarm

A bleep tone will sound when using the HWS alarm. The alarm bleep will increase in volume every 15 seconds for one minute followed by one minutes silence before repeating the cycle. The HWS alarm will sound for one hour unless turned off by pressing the Power button. Pressing the Power button whilst the alarm is sounding will cancel the alarm for 24 hours.

1.The HWS alarm time can be set with the radio switched on or off.

2.Press and hold down the Alarm On/Off button until the hour digits and alarm symbol flash in the display.

3.Repeatedly press the Alarm mode button until the display shows

ALARM .

4.Set the required hour using the Tuning up/down buttons.

5.Press the Time set button, the minute digits will flash in the display.

6.Set the required minute using the Tuning up/down buttons.

7.Press the Time set button to complete alarm setting.

8.To permanently cancel the alarm press and hold down the Alarm On/

Off button until the ALARM symbol is removed from the display.

If you need any further advice, please call our Technical Helpline on :-

A larm

O n / O ff

Mo d e

/

Tuning

Manual/Auto Seek

B an d

Tim e

S e t

Tuning

Manual/Auto Seek

B an d

Tim e

S e t

ALARM

ALARM

ALARM

ALARM

ALARM

ALARM

0181 758 0338 (Mon-Fri)

14

 

Image 15
Contents Roberts Controls Front Controls Top Controls Right side Controls Rear Underside Display AlarmBattery operation Battery replacementMains operation Setting the clock Operating the radio Scan tuningKHz Manual tuning983 Rotary tuningStoring stations in preset memories Recalling stations from preset memories Alarm Setting the radio alarmSetting the HWS Humane Wake System alarm Snooze function Sleep functionDisplay backlight Headphones socket Lock SwitchReset button SpecificationsCircuit Features General Mains supplyFuse Roberts Radio Technical Services Department