Roberts Radio R983 manual Reset button, Specifications, Circuit Features

Page 18

Reset button

If the radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.

1.With the aid of a suitable implement (the end of a paper clip) press the reset button located on the underside of your radio for at least 5 seconds, this will reset the microprocessor, clock time and clear all stations stored in preset memory.

If a problem persists our technical staff would be pleased to help offer any assistance on operating the radio. Our technical helpline number is, 0181 758 0338.

RESET

Specifications

Power Requirements

Mains

AC 230 volts, 50Hz

only

Batteries

4 x LR20 (D size)

 

Battery Life

Approx. 70 hours of listening for 4 hours a day at normal volume using alkaline cells.

Frequency Coverage

FM 87.5-108MHz

MW 522- 1710kHz

LW 144- 279kHz

Circuit Features

Loudspeaker

125mm 4ohms

 

Output Power

Mains

1.8 Watts

 

Batteries

0.9 Watts

Headphone socket

3.5mm dia

 

Aerial System FM

Telescopic aerial

MW

Built-in Ferrite aerial

LW

Built-in Ferrite aerial

17

Image 18
Contents Roberts Controls Front Controls Top Controls Right side Controls Rear Underside Alarm DisplayBattery operation Battery replacementMains operation Setting the clock Scan tuning Operating the radioManual tuning KHzRotary tuning 983Storing stations in preset memories Recalling stations from preset memories Setting the radio alarm AlarmSetting the HWS Humane Wake System alarm Snooze function Sleep functionDisplay backlight Lock Switch Headphones socketReset button SpecificationsCircuit Features General Mains supplyFuse Roberts Radio Technical Services Department