CONNECT DVD PLAYER TO OTHER APPLIANCES
It is recommended you connect the player to a
TV.
Ensure that this player and other appliances (TV set and amplifier) that will be connected to the player are set to OFF mode and that the AC cords are disconnected from the wall
outlet.
Avoid blocking ventilation holes of the connected appliances
and make sure air around there can circulate freely.
Read carefully and follow the instructions before connecting
other appliances.
Observe the color coding when connecting audio and video cables.
AUDIO R AUDIO L VIDEO IN | YUV INPUT | |
| ||
AV AUDIO/VIDEO INPUT |
|
|
|
| TV SET |
A/V cable |
| |
| (optional) |
|
Coaxial digital audio cable
To coaxial digital audio
input connector
Decoder or Amplifier with Dolby Digital
(All sold separately)
After connection is firmed and securely done, plug AC ADAPTER to an applicable wall outlet and turn on the player.
1. S-VIDEO OUTPUT CONNECTORS
The S (separate) video output connector separates the color
(C)and luminance (Y) signals before transmitting them to the TV set in order to achieve a sharper picture.
Use the
2. COAXIAL DIGITAL AUDIO OUTPUT
When a DVD recorded in Dolby Digital/DTS is played, Dolby digital/DTS bitstream is output from the player's COAXIAL digital audio output jack. When the player is connected to a Dolby Digital/DTS decoder , you can enjoy
CONNECTING TO A CAR ADAPTOR
The 9V car power adaptor is designed for use with vehicles that have a 12V, negative ground electrical system.
WARNING:
Disconnect the car power adaptor when not in use. Not in use in 24V vehicles.
To the cigarette lighter socket
CAUTIONS:
Use the unit only with 9V car power adaptor, use with other car power adaptor could damage the unit.
The recommended 9V car power adaptor is for use with this unit only. Do not use it with other equipment.
In the interests of road traffic safety, do not operate the unit or view video software while driving a vehicle.
Make sure the unit is fastened securely to prevent from moving about inside the vehicle in the event of an accident
When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.
After use, disconnect the 9V car power adaptor from both the unit and cigarette lighter socket.
FUSE REPLACEMENT | FUSE |
|
OPERATION
PREPARATION
Power on the TV set and select video input mode. Power on the audio system which is connected to the player.
GET STARTED
1.Press POWER switch to turn on the player.
2.Press CD cover Open to open the disc tray.
3.Place a disc onto the disc tray.
4.Press CD cover Open to close the disc tray and the playback starts automatically.
5.When a menu screen appears on the TV, move the navigation buttons or press the numeric buttons to select a preferred track number, then press OK button to start playback.
ADJUST THE VOLUME
Press the VOLUME+ button to increase or VOLUME- button to reduce the volume.
SKIP AHEAD OR BACK
Press NEXT SKIP or PREV SKIP button once during play to skip a chapter(DVD) or a track (Video CD/CD) ahead or backwards.
RAPID ADVANCE/ REVERSE
During playback, press F.FWD button or REV button several times to scan the disc forward or backward at X2, X4, X8, X20 normal speed.
Press PLAY button to resume normal play.
STOP PLAYBACK
Press STOP button during playback to stop playback; the player activates its resume function when STOP is pressed in STOP mode; press PLAY button again, playback resumes at the point it stopped previously; open the disc tray or press the STOP button one more time to clear the resume function.
SLOW-MOTION PLAY (DVD/VCD)
Press and hold ZOOM/SLOW button on the remote control for a moment during playback, the disc will be played at 1/ 2 normal speed at first, each time this button is pressed, the play speed becomes slower (down to 1/7 normal speed.) Press PLAY button, normal play will resume.
3