Magnasonic DVD850-2 Disc Handling Precautions, Troubleshooting, Video Setup, Speaker Setup

Page 7

4. VIDEO SETUP

VIDEO SETUP

BRI

CON

HUE

SATURATION

EXIT SETUP

4.1BRI - to set the brightness for the display. Options: 0/2/4/6/8/10/12

4.2CON - to set the contrast effect for display. Options: 0/2/4/6/8/10/12

4.3HUE - to set the colour impression for display. Options: -6/-4/-2/0/+2/+4/+6

4.4SATURATION - to set the saturation level for display. Options: 0/2/4/6/8/10/12

DISC HANDLING PRECAUTIONS

￿Hold the disc by the edge so the surface will not be soiled with finger prints. Finger prints, dirt and scratches can cause skipping and distortion.

￿Do not write on the label side with a ball-point pen or other writing utensils.

￿Do not apply benzine, thinner, and liquid that

prevents against static electricity.

￿Be careful not to drop or bend the disc.

￿Instal only one disc on the disc tray.

￿Do not try to close the disc tray when the disc is not in stalled properly.

￿Be sure to store the disc in it's case when not in use.

5. SPEAKER SETUP

SPEAKER SETUP

DOWNMIX

EXIT SETUP

5.1 DOWNMIX

Options: LT/RT- Left/Right mix mode STEREO- Select this option if you don't

have a 5.1 channels amplifier.

TROUBLESHOOTING

If your DVD player does not seem to be functioning properly, check the items below before you contact an authorized service center

Symptom

Check

 

 

Power does not turn on or

Make sure the AC adapter is securely plugged into an AC outlet.

suddenly turns off.

Turn the power off and then back on.

 

 

 

 

 

 

 

Battery pack is in place but

Check that the battery pack is charged. If not, recharge it.

 

 

 

the power does not turn on

 

 

 

or suddenly turns off

 

 

 

 

 

 

 

Remote control won't work

Check that the battery is inserted in the

 

and direction properly.

 

The battery may be flat. Replace it with a new one.

 

 

 

 

 

Check that the signal transmission is directed at the remote control sensor on the DVD player.

 

Remove the obstacle between the remote controller and remote control sensor.

 

 

No picture or sound

Check that the A/V cables are securely connected.

 

Check that the disc is a DVD (region number 1 or all), DVD-RW, VIDEO CD or AUDIO CD.

 

Do not use a disc that has scratches or dirt.

 

Check that the label-side of the disc is facing up.

 

The pick-up lens of the DVD player may be dirty. Contact the service center for lens cleaning.

 

Check that the TV channel is set to VIDEO or AV if viewing with a TV.

 

 

 

 

No picture

Check that the LCD display is turned on.

 

 

 

 

No sound

Check that the display panel is open. If it is closed, audio will not be output to the speakers.

 

 

 

Check the volume setting. If set to zero, turn up volume level.

 

 

 

Check that the headphones are plugged into the PHONES socket.

 

Speakers cannot be used with the headphones.

 

 

No picture and sound

Check that the battery is properly installed and AC Adapter is properly connected.

Distorted video or sound

Use a disc without scratches or dents.

 

 

 

 

 

 

6

Image 7
Contents DVD850-2 Laser Overview of the DVD Player GET a Quick Glance AT the Remote ControllerOperation Connect DVD Player to Other AppliancesZoom Play Language Setup System SetupAudio Setup Speaker Setup Disc Handling PrecautionsTroubleshooting Video SetupMagnasonic Warranty